Motorkit 12 V für Omnistor 5200 – anthrazit

DANGER Danger of death from electric shock when touching electrical equipment! ?? Never mount antennas under or near overhead power lines. ?? During installation, keep a distance of at least 1 m from all electrical devices. Never work on antenna systems when a thunderstorm is approaching or during a thunderstorm. WARNING Risk of serious injury during installation work on the roof! ?? Wear sturdy, non-slip shoes. ?? Only enter roofs or areas where there is a risk of falling if you are wearing a properly fastened and intact safety belt or use a work platform. ?? Ensure that the roof and the climbing aid are dry, clean, and non-slip. Ensure that the person performing the installation/repair has a secure standing and holding position. If necessary, strap them to the roof. ?? Ensure that the person installing/repairing is not afraid of heights and can move safely on the roof can. ?? Ensure that the roof is sufficiently stable and can support the weight of the person installing/repairing it If in doubt, contact a qualified dealer or roofing professional. ?? Ensure that no one is below the installation site during installation/repair. ?? Observe the respective country-specific safety regulations and current standards, e.g. DIN EN 60728-11. WARNING Danger of serious injury due to fire hazard in case of atmospheric overvoltages (static charge) or Lightning discharges (e.g. thunderstorms)! Never mount antennas on buildings with highly flammable roof coverings, such as straw, reed, or similar materials. WARNING Risk of serious injury and/or property damage by lightning or static charge or short circuit! ?? Earthing and lightning protection work by specially trained electrical specialists have it carried out. ?? Never carry out earthing and lightning protection work by Persons who are not specialists with appropriate knowledge. ?? A potential equalization made of 4 mm² copper create. ?? The cable shields of all coaxial antenna down-lead cables via an equipotential bonding conductor connect to the mast.